|
|
|
||||||||||||||
|
|
|
|
||||||||||||||
|
|
|
|
||||||||||||||
|
|
|
|
||||||||||||||
|
|
2 Minute Video
Introduction (NEW) |
Brochure |
Reconditioned Forklifts |
Recent Arrivals |
Locations & Directions |
Powder Coating |
Subscribe to
monthly Specials Email |
We Deliver | Meet The Crew | References |
HELI Internal-Combustion Counterbalanced Weight Type
|
All specifications subject to change without notice or obligation.
| MODEL | CPYD20C | CPYD25C | CPYD30C |
| Load Capacity @24" load center | 4,000 lbs | 5,000 lbs | 6,000 lbs |
| Lifting Speed | 102/108 fpm | 102/108 fpm | 102/108 fpm |
| (Without/With load) | |||
| Travel. Max. Speed | 11.2 mph | 11.2 mph | 9.9 mph |
| Overall Height Fork Raised | 158.7" | 158.7" | 167.3" |
| Max. Fork Height | 118" | 118" | 118" |
| Overall Height (With Mast) | 78.5" | 78.5" | 81.5" |
| Free Lift | 6.3" | 6.3" | 6.3" |
| Overall Length (With Fork) | 124.8" | 131.9" | 138.5" |
| Overall Length (Without Fork) | 88.6" | 89.8" | 96.5" |
| Min. Under-Clearance | 3.2" | 3.2" | 3.2" |
| Overhang (Front/Rear) | 16/18.1" | 16/19.3" | 18.7/21.3" |
| Wheel Base | 55" | 55" | 59" |
| Overall Height (With Overhead Guard) | 81.5" | 81.5" | 82.3" |
| Overall Width | 42.1" | 42.1" | 45.3" |
| Opening of Forks | 9.6-40.2" | 9.6-40.2" | 9.8-41.7" |
| Tread (Front/Rear) | 35.5/35.4" | 35.5/35.4" | 37.1/38.2" |
| Min. Intersecting Aisle | 78.2" | 80.1" | 81.7" |
| Min. Turning Radius (Outside) | 75.6" | 79.1" | 83.1" |
| Fork Size | 36.2/4.8/1.57" | 36.2/4.8/1.57" | 42.1/4.92/1.77" |
| Max. Drawbar Pull (Without/With load) | 4269/1874 lbs | 4269/1874 lbs | 4269/1874 lbs |
| Tilt Angle (F/B) | 5-10 degrees | 5-10 degrees | 5-10 degrees |
| Max. Gradeability (With load) | 20% | 20% | 20% |
| Engine Model | GM 3.0 (LPG) | GM 3.0 (LPG) | GM 3.0 (LPG) |
| Compress Ratio | 8.2:1 | 8.2:1 | 8.2:1 |
| Rated Horsepower | 61.5 hp/2800 rpm | 61.5 hp/2800 rpm | 61.5 hp/2800 rpm |
| Rated Torque | 141 lb ft/1400-1600 rpm | 141 lb ft/1400-1600 rpm | 141 lb ft/1400-1600 rpm |
| 12 V/60 Ah | 12 V/60 Ah | ||
| Battery Voltage/Capacity | 12 V/60 Ah | Cushion | Cushion |
| Tire Type | Cushion | 8404 lbs | 9724 lbs |
| Service Weight | 7634 lbs | ||
All specifications subject to change without notice or obligation.
Click here to view Heli Forklift Factory Information
|
The revised
OSHA standard for powered industrial truck training requires that an
employer provide training to truck operators on a variety of topics. Among
these topics are vehicle inspection and maintenance that the operator will
be required to perform. OSHA provides "Sample Daily Checklists for Powered Industrial Trucks" which may be of interest to our customers. |
|
||||||||||
|
||||||||||
|
||||||||||
|
Copyright (c) 2004 Warehouse Rack Company, LP, All rights reserved.
|
Liquidations in Progress
